MAP Audio – Rhino3 v1.3.3 for WiN

Six oscillators per voice with FM sources, additive sources and wavetables, two multimodal filters, envelopes, FM routing matrix, step sequencer and four effects slots.

The engine

The sources are mixed within a single voice: a pair of frequency modulators can be placed next to the drawn spectrum, and both are passed through the same filters and envelopes.

Six oscillators, a full matrix of frequency modulator (FM)

inputs. Each voice employs six oscillators. The source can be one of the built-in waveforms or one of six wavetables, which you draw in the additive editor or create from WAV data. Any oscillator can frequency modulate any other oscillator, including itself, with exponential or linear scaling, and two ring modulators accept any combination of oscillators as input. Each oscillator has its own waveform generator.

Two filters, 26 modes

low-pass, high-pass, band-pass, and notch with cutoff frequencies of 12, 24, and 36 dB per octave. Three analog low-pass and high-pass filter models, as well as comb, band-pass, diode, transistor ladder, Sallen-Key, and SEM filters. Each generator sends a signal to filter 1, filter 2, and the dry bus in any mix. Each filter can feed a signal to another, and each filter circuit contains a waveform shaper.

Envelopes you draw

Thirty-one of them: level, waveform, pitch, and phase for each oscillator, cutoff, resonance, and waveform for each filter, plus a global pitch envelope. Up to 128 segments in each, with curvature, repeat range, and tempo sync. A separate curve is provided for keyboard tracking, velocity sensitivity, and aftertouch.

Effects

Four effect slots with 24 types: two delays, six choruses, three ensembles, flanger, quad phaser, four reverbs, granulator, CrazyComb, autopan, rotary speaker, ring modulation, overdrive and a three-band EQ.