MAP Audio – MFX v1.1.0 for WiN

Connect four cells in series, parallel, or with feedback—all with a single insert. Set the level of each connection directly on its cable.

33 effects in each cell

Each cell contains all 33 built-in effects shared with PAM. Create your own chain in each cell or use a single effect with four settings. Select an effect below to open its settings and audition it individually.

Close the feedback loop

Run a cable from a cell to itself or to the previous cell. Set the return level on the cable. The cable adds a fixed latency of 64 samples, even when the DAW buffer is changed; effects in the loop can add even more latency. Depending on the patch and the return level, the loop can decay, maintain the signal, or oscillate.

Modulation Across a Patch

Map one modulation source to controls in multiple cells.

Six global low-frequency oscillators

Run them randomly or synchronize them with the host. Choose a preset shape or design your own.

Followers and ParamSeq

Each cell has a follower for its own audio signal or a signal from another cell. Route stereo sidechain modulation to a cell to make it follow it. ParamSeq moves the mapped controls one step at a time.

Combo Knobs and Automation

Assign controls from different cells to any of the three combo knobs. A single turn moves the entire stack. The combo knobs, effects controls, and the global mixer are available for automation.