FabFilter – Total Bundle v2026.10.27 for WiN

Total Bundle is a collection of all FabFilter plugins. In this bundle you get our professional EQ, reverb, compressor, multiband dynamics, limiter, de-esser and gate/expander, creative multiband distortion, delay, filters and synth plugins.

Total Bundle gives you full, unfiltered access to all FabFilter plugins. In this package, you get the best equalizers, compressors, limiters, de-essers, gates/expanders, multiband distortions, stereo delays, filters and synthesizers on the market in one fell swoop .

Pro-Q 4 – High Quality Equalizer

Pro-Q 4 is one of the most complete EQ plugins for mixing and mastering, setting a new standard for mixing and mastering. With improved sound quality and an easy-to-use interface, Pro-Q 4 combines precision and creativity. A particular highlight is the Spectral Dynamics mode, which targets problematic frequencies without affecting the entire frequency range. Other features include linear phase modes, flexible mid/side editing, Dolby Atmos support, and the innovative Sketch EQ for intuitively drawing filter curves.

Pro-R 2 – High-quality reverb module

Pro-R is a high-quality algorithmic reverb that creates enough density for realistic sound, but does not overload the mix and provides sufficient transparency. The user interface is clearly structured and allows you to intuitively achieve the desired effect. A unique decay rate equalizer allows you to adjust the reverb duration depending on the frequency. There is also a post-equalizer for adjusting the frequency response of the output signal.

Pro-L 2 – Multifunctional true peak limiter module

With Pro-L 2, you get a professional limiter that delivers both loudness and clarity. The plug-in features high-precision output signals and level meters that are essential for professional applications. K-System is also supported. With phase oversampling, advanced anti-aliasing and noise shaping, adjustable advance, attack, attenuation and linking settings, Pro-L is a complete solution for mixing and mastering tasks.

Pro-C 2 – Professional Compression Plugin

The Pro-C 2 is a high-quality compressor module with three different software-dependent compression types. The Pro-C 2 impresses not only with its sound quality, but also with its innovative interface, which makes working with this compressor very easy. In expert mode, the plug-in provides flexible signal routing with freely configurable side chain and channel coupling. In addition to input and output level meters, the Pro-C 2 features a knee display and an animated compression display, which provides a comprehensive visualization of the editing process.

Pro-MB – Professional Multi-Range Compressor and Expander

Pro-MB provides an intuitive approach to multi-band dynamic editing. Instead of traditionally splitting bands using transitions, Pro-MB allows you to create new bands directly in the desired frequency range. The interactive multi-band display clearly shows that the rest of the frequency spectrum remains untouched. Pro-MB has a unique dynamic phase processing mode. It basically has the same frequency response as a conventional multi-band processor, but without the often occurring delays or distortions. Only minimal phase changes occur when changing the gain. Alternatively, linear phase and minimum phase modes are available.

Pro DS – Intelligent De-Esser

Even with the best microphones, preamps and converters, it is impossible to avoid sibilance in vocal recordings, which then occurs during further processing with compressors etc. Even more come to the fore. Thanks to the “single vocal” recognition algorithm, the Pro-DS can accurately identify and specifically muffle sibilance. In “Allround” mode, the Pro-DS is an excellent tool for editing high frequencies in complex materials, such as drum kits or even complete mixes. Despite the complex application possibilities, the Pro-DS is very easy to use thanks to its well-designed interface. Additional features include a preview function with a duration of up to 15 ms, adjustable stereo linking and additional processing “only in the middle” or “only on the sides”.

Pro-G – Flexible gate/expander plugin

Pro-G features carefully balanced algorithms, full control over the side chain and channel coupling, excellent metering and clear display. In addition to the excellent sound, the plug-in impresses with its flexibility of configuration. The user can choose between mono, stereo and MS processing, and in expert mode the side chain inputs can be fully configured according to their own requirements.

Saturn 2 – Multiband Distortion/Saturation Plug-in

Saturn 2 is a multi-band distortion that covers a wide range of distortion effects. From subtle saturation that simulates the work of a tube or tape machine, to the strong distortion of a guitar amp. The big advantage of Saturn is the presence of six bands, each of which allows you to adjust the feedback, dynamics, tone and modulation parameters separately. With XLFOS, envelopes, amplifier envelopes and MIDI controllers, Saturn has almost endless modulation possibilities that are easily created with drag and drop.

Timeless 3 – Vintage Tape Delay Plugin

Timeless 3 not only emulates classic tape echo at the highest level, but also makes a great sounding tool thanks to its creative possibilities. With this plugin, you can create echo, but also chorus, flanger, phaser, even scratch effects and much more. The delay signal is passed through two high-quality multimode filters (from Volcano 2) and then fed back to the delay channels using adjustable feedback and crosstalk controls. Each channel can be phase inverted.

Volcano 3 – Powerful Filter Plugin

Volcano 3 is a filter plug-in module that has a distinctly analog sound. Despite its wide range of functions, its operation is extremely simple and straightforward thanks to the “what you use is what you see” concept. In Volcano 3, up to four multimode filters can be used simultaneously. In addition to the distinction between low, high, band, formant, etc., the slope and sound characteristics can also be freely selected. The four filters can be controlled in different modes and are equipped with pan and delay settings.

Twin 3 – Powerful Synthesizer Plug-In

Twin 3 is a sophisticated analog synthesizer emulation, although no specific model is modeled. Rather, Twin 3 focuses on creating powerful oscillators and flexible filter options. The oscillator signal is passed through two high-quality multimode filters (from Volcano 2), which are extremely versatile and allow free combination of modes, slopes and characteristics. The oscillators can drive the filters in series or in parallel. To enhance the sound, there is a delay section with its own filters.

One – Simple Synthesizer Plugin

One is a very simple synth plug-in. It has only one, but very powerful oscillator that generates typical analog basic waveforms and pulse width modulation. The low-pass filter is modulated by an envelope and a syncable low-pass filter. One is a simple synth for bass lines, leads and simple pads. The focus is on a round sound.

Simplon – Basic Filter Plugin

Simplon is a simplified version of Volcano 2. It has two independent filters, each of which can be used as a low-pass, band-pass or high-pass filter with three different slopes. Both filters can be connected in series or parallel. The filters have an analog sound character and can reproduce self-oscillations. Thanks to three different characteristics, the main sound can vary from soft to aggressive. Combined filter settings allow you to use 27 different filter types.

Micro – Mini Filter plugin

Micro is a very simple filtering plugin. It uses the algorithm and sound of the Fabfilter One synthesizer. The round, soft sound can be transformed into a rough and aggressive one thanks to self-oscillation and high gain. The filter can be switched between low and high frequency modes and, in addition to manual adjustment, can also be modulated using an envelope follower depending on the input material.

What’s new

Small bug fixes for all plug-ins Apr 16, 2026.

  • Pro-Q 4 : Fixed a crash that could occur when setting the dynamic range of a spectral band to zero while having at least one more band that is not spectral.
  • Pro-L 2 and Pro-L 1 : Fixed an issue that caused the red gain reduction curve in the level display to show without a proper fill color.
  • Pro-C 3, Pro-L 2, Pro-R 2, Saturn 2, Timeless 3, Volcano 3, and Twin 3 : The new copy/paste functionality (by right-clicking on the preset button) now also works when pasting from an earlier plug-in version.
  • Pro-MB : Fixed a bug that made it impossible to change crossover frequencies by dragging a slope button horizontally.
  • Pro-Q 4, Pro-C 3, Pro-R 2, and Twin 3 : Improved the preset browser’s response to hovering over a folder and then moving to the right to navigate inside it. Even if you move the cursor diagonally, the current folder remains selected, so you don’t have to move strictly horizontally.
  • Pro-Q 4, Pro-C 3, Pro-R 2, and Twin 3: Improved how the preset browser reacts when you hover over a folder and then move to the right to navigate inside the folder. Even when the movement is slightly diagonal, it keeps the current folder selected, so you don’t have to move in a straight horizontal line.
  • The macOS installers now contain a customize page where you can choose the plug-in formats to install. The Total Bundle macOS installer also lets you choose the plug-ins to install.
  • Minor bug fixes.

Main Plugins

  • FabFilter Micro 1.3.2
  • FabFilter One 3.5.2
  • FabFilter Pro-C 3 3.0.2
  • FabFilter Pro-DS 1.3.2
  • FabFilter Pro-G 1.4.2
  • FabFilter Pro-L 2 2.2.6
  • FabFilter Pro-MB 1.3.3
  • FabFilter Pro-Q 4 4.1.3
  • FabFilter Pro-R 2 2.0.6
  • FabFilter Saturn 2.1.3
  • FabFilter Simplon 1.4.2
  • FabFilter Timeless 3.1.0
  • FabFilter Twin 3.1.0
  • FabFilter Volcano 3.0.9
(Optional) Previous version to ensure compatibility with older projects:
  • FabFilter Pro-C 1.2.3
  • FabFilter Pro-C 2 2.2.2
  • FabFilter Pro-L 1.3.6
  • FabFilter Pro-Q 1.2.3
  • FabFilter Pro-Q 2 2.3.0
  • FabFilter Pro-Q 3 3.2.9
  • FabFilter Pro-R 1.2.0
  • FabFilter Saturn 1.3.1
  • FabFilter Timeless 2 2.4.1
  • FabFilter Twin 2 2.4.1
  • FabFilter Volcano 2 2.4.1
FabFilter – Total Bundle v2026.10.27 for WiN
  • Download FabFilter – Total Bundle v2026.10.27 [R2R] VST|VST3|AAX|CLAP [WIN] [10/31/2026]
  • Original Publisher: FabFilter
  • Version: v2026.10.27
  • Format: VST, VST3, AAX
  • Category: VST Plugins
  • Require: WIN 7+
  • License type: Full
  • Download Size: 322.5 MB
Subscribe
Notify of
guest

65 Comments
ery
ery
6 months ago

where is the keygen?

alper
alper
6 months ago

it doesn’t download the keygen

zamini
zamini
4 months ago

How to Use WitchUnIns to perform batch uninstalling

bille
bille
Reply to  zamini
4 months ago

Go to the Team R2R system folder (located in Program Files\TeamR2R) and open WitchUnIns.exe. Enter the manufacturer’s name—in this case, FabFilter. A batch uninstaller will then be created; save it to your desktop, for example. It will be a .bat file. Double-click it, and FabFilter plugins will be uninstalled.

Saman Amirrahmani
Saman Amirrahmani
4 months ago

Pro-C 3 doesn’t work.

Pavel
Pavel
3 months ago

Despite installers being from R2R, it still wants a license. Even when I installed the R2R application

Pavel
Pavel
Reply to  Pavel
3 months ago

Never mind, it needed a reboot to make the R2R application (you can download it at: https://audiostorrent.com/team-r2r-r2r-system-free-download-for-win/) work in full.
Then the one can click a *.r2rwm file to register a plugin.

ElEco
ElEco
2 months ago

Antivirus and firewall disabled, downloaded 4 times, and tried, but no keygen included.

jdoe
jdoe
2 months ago

credential stealer, stay away 🙂

DJLOF
DJLOF
2 months ago

donloaded but not have KeyGen into the folder. No antivirus run.

Bruno
Bruno
1 month ago

Funciona en la version original de Protools Artist?

Richard Norris
Richard Norris
20 days ago

Thank you VR ❤